← Back to overview Tactics & Matchday

Line-up

The line-up decides who plays and in which position. It's the foundation your tactics are built on – and the most common place where managers give away strength for nothing. Here you'll learn how the match engine really rates your eleven.

The most important rule: the right position

Every player has an ideal position (some have a second). Only there do they bring their full strength. How strongly they take the field depends directly on how far you move them away from their position:

Where you play himEffective strength
Ideal position (1st or 2nd)100 %
Same line, different position (e.g. CB instead of RB)90 %
Wrong line (e.g. a striker in defence)50 %
Outfield player in goal / goalkeeper outfieldonly 15 %
This is where most lose points

A 90-rated striker at full-back brings only 45 effective strength – weaker than a 70-rated defender in his own position. Always play players as close to their position as possible. When in doubt, pick a weaker specialist over a strong player in the wrong role.

Second position 2.0, roles & striker sides

Since 5.0.1 any outfield player can gain a second position outside his own unit. The nightly evaluation checks in three steps – if one step doesn’t apply, the next one does. Once assigned, the second position is permanent.

  1. Roles – a pair of abilities averages at least 5 points above the player’s own outfield average (average of the seven outfield values; example: outfield average 103 → the pair needs an average of 108):
    • Strikers: pace + technique → LM/RM (left-footers left, right-footers right) = winger, game intelligence + shot accuracy → AM = false nine.
    • Full-backs: game intelligence + shot accuracy (foot matching the flank, or two-footed) → LM/RM = wing-back.
    • Wide midfielders & AM: LM/RM with tackling + pace → LB/RB = wing-back, with shot power + technique → ST = winger; AM with shot power + heading → ST = false nine.
  2. Two-footed wide players – LB/RB and LM/RM get the other flank (LB ↔ RB, LM ↔ RM).
  3. Basic rule – defenders with an attacking profile (pace + shot accuracy + technique above heading + tackling + game intelligence) → full-back by foot, otherwise CB; midfielders with an attacking profile → LM/RM by foot, otherwise AM, CM or DM – depending on whether game intelligence + technique or tackling + shot accuracy prevail. If that would be the player’s own position, DM and AM get CM and a CM gets AM or DM.

If the basic rule also only yields the player’s own position (e.g. an attacking right-footer on RM), the field stays empty for now and is checked again at every evaluation. Rules as of 28 Oct 2026.

Roles: what a player with a role does in the match depends on where you play him. His match strength is split between midfield and attack, and in the three chance phases – build-up, pass, finish – he is picked with different weights than a plain positional player. The line-up screen shows the role as a badge.

RolePlayed asStrength counts forBuild-up / pass / finish
WingerLM/RM65 % midfield + 40 % attack
(wide midfielder: 100 % midfield)
14 / 20 / 20
(wide midfielder: 18 / 12 / 12)
Shadow striker
false nine at AM
AM75 % midfield + 30 % attack
(AM: 100 % midfield)
12 / 20 / 26
(AM: 18 / 16 / 18) – more finishing, less build-up
False nine
up front
lone striker or centre of a front three85 % attack + 25 % midfield
(striker: 100 % attack)
10 / 30 / 22
(striker: 0 / 30 / 30) – drops deep, joins the build-up, finishes less often

At AM the false nine therefore acts as a shadow striker: he looks for the finish and leaves the build-up to others. Only up front does he play the real false nine – dropping deep, starting attacks and setting them up, but less often applying the finish himself. A player with a role brings a little more strength overall (105 or 110 % instead of 100 %) but spreads it differently: the shadow striker leaves gaps behind him, the false nine lacks punch in front of goal.

Striker sides: the left, central and right forward spot is saved exactly as you set it (two strikers = left/right, one = centre). The foot matters: right-footer on the left or left-footer on the right −3 % match strength, two-footed in the centre +2 %. A small dot on the shirt warns about the wrong foot. Substitutes take over the spot of the player they replace.

Foot rule on every line: the same side logic applies to CB, DM, CM and AM as soon as two or three players share a line (two = left/right, three = left/centre/right). The wrong foot on the outside costs −3 % there as well; outside the attack the centre bonus for two-footed players only exists in a line of three. Full-backs and wide midfielders (LB/RB, LM/RM) are not affected by the foot.

Wing-backs & the false nine up front (5.0.1): a wing-back is a full-back with a wide-midfield second position or a wide midfielder with a full-back second position (LB/LM, RB/RM). Wide midfielders earn it as fast tacklers (tackling + speed well above their own average). With three centre-backs on the pitch he gets +3 % match strength – where the wing-back actually operates in the system: in a back three (no full-backs, e.g. 3-5-2 or 3-4-3) at LM/RM, in a back five (LB and RB next to the three centre-backs, e.g. 5-3-2 or 5-4-1) at LB/RB. In a back five there is no wing-back bonus in wide midfield (rule since 1 Oct; decided per side). A false nine (striker with AM as second position) only unfolds his real role up front – as lone striker or in the middle of a front three; at AM he is a shadow striker (figures in the roles table above). Since 28 Sep the winger and false-nine roles also work the other way round: an LM/RM or AM with ST as second position carries the same role.

Formation & system

The formation determines how many defenders, midfielders and strikers you put on the pitch – and their exact arrangement. KoF offers many systems, roughly grouped by the back line:

Back lineExamplesCharacter
Back three3-4-3, 3-5-2, 3-4-1-2, 3-1-4-2attack-minded, more players forward – more vulnerable at the back
Back four4-4-2 (diamond/flat/block), 4-3-3, 4-2-3-1, 4-1-4-1, 4-4-1-1balanced – the all-purpose standard
Back five5-3-2, 4-5-1, defensive 4-3-3 variantsdefensively solid, great for protecting a lead

Add-ons like diamond, flat, wide, block, attacking, defensive change the width and focus of a system. Important: the formation sets the base distribution – the orientation then shifts strength between defence and attack during the match on top of that.

Squad first, then system

Pick the system that suits your best players in their ideal positions – not the other way round. Three top strikers? Play a back-three/back-four system with three up front. A rock-solid central defence but no wings? Then don't force a wide system.

Formation picker 2.0 (5.0.3)

The formation picker shows every formation as a card with a mini pitch (attack at the top, goalkeeper at the bottom), grouped by back three, four and five, with filter chips and the current formation at the top. Two duplicate systems were merged (4-5-1 wide is now 4-2-3-1, 3-5-2 compact is 3-5-2 cross; saved line-ups stay valid), and 3-5-2 (attacking, DM) with a holding midfielder instead of a central one and 3-4-2-1 were added.

Players stay when you change formation (5.0.3)

Changing the formation no longer empties the eleven: whoever finds their position in the new system stays there; all remaining outfield players are placed on the free positions with the best match strength (including foot and wing-back factors), with pairwise swaps whenever that raises the total. Goalkeeper and bench stay as they are. A note tells you how many players are in a new position – give those a quick check.

Formation suggestions & Recent (5.1.0)

The formation picker now has a row of purple chips. Recent lists the formations you've played lately. If you have an assistant coach under contract, Assistant joins them: Heinz Hütchen runs the numbers on your fit squad and suggests the three formations in which your best eleven reaches the highest match strength – each with its match strength and the gap to your current formation. Use formation + XI sets system and starting eleven in one go; the app fills the bench from your previous bench (backup keeper first). Then just save.

Who counts where? Positions in the match

Not every position is involved in everything. The match engine distributes the scenes by position – this is how you deploy your players optimally:

PositionMain job in the match
Striker (ST)drives the attack and the finishing most of all – this is where your best finishers belong
Attacking midfield (AM)second most important man for chances & finishing – the creative hub
Wide midfield (LM/RM)creating chances down the flanks
Central midfield (CM)the link – involved in build-up, attack and defence
Defensive midfield (DM)winning the ball and shielding the defence
Defence (CB/SW/LB/RB)defends the opponent's chances away
Goalkeeper (GK)the last line; with the right abilities also build-up play (counters)
The lines support each other

The three lines don't work in isolation: a strong midfield lifts both defence and attack – it's the heart of the team. Lose the centre and you usually lose the match. And: special abilities count triple in the one-on-one duels – the right skill in the right position decides tight scenes.

Reading strength correctly: best 11 avg., best 15 avg. & strength comparison

On the line-up screen you see three figures – they help you judge the squad (since 5.0.5 they already include the effect of your Mancini on match strength):

The strength comparison lets you set your values against those of the opponent. With Scout opponent you get extra statistics – use them to tune your formation and tactics specifically to the opponent.

Scouting report (from 5.0.1): after scouting you also see the opponent's best eleven by match strength (one keeper + ten outfield players, with the total), the captain and set-piece takers (if assigned), the record of the last 10 matches (wins/draws/defeats, average goals scored and conceded), the kick-off tactics in those matches (mentality, effort and aggression as a distribution; AI clubs show their profile mentality) and the goal threat (top three scorers of the season with assists).

Form sometimes beats strength

The displayed strength isn't everything: in the match what counts is match strength including form. A slightly weaker but fresh and highly motivated player can beat a jaded star. Before busy weeks, rotation pays off.

Bench & absentees

You need 11 outfield players, otherwise the line-up can't be saved. The substitutes on the bench are ready for substitutions – plan them to fit the changes you intend to make. Suspended (cards) and injured players are not eligible and show up under "Absentees".

Saving

The app keeps unsaved changes as a draft for 30 minutes – even across a restart. If you leave the lineup without saving and answer "Do you want to proceed?" with Yes, the draft is deliberately discarded: next time you open the screen you see your saved lineup again.

After saving: on to tactics (5.1.0)

Once the line-up is saved, the app confirms "Your XI is set!". To tactics takes you straight to the tactics for exactly this match, Later keeps you on the line-up screen.

Captain & set-piece takers

Who you make captain and who takes the corners, free kicks and penalties is set on the team screen. Both have a real impact on the match: the captain gives the team a boost from the 80th minute on, and good set-piece takers convert more dead balls. When picking your line-up, make sure your captain is actually on the pitch right to the end.

How to line up well

In short

Ideal position = 100 %, wrong line = 50 %, goal/field swapped = 15 % · 11 players mandatory · pick your system around your best players · best finishers at ST/AM, ball-winners at the back, CM as the link · best 11 avg./best 15 avg. & scouting for comparison · form can beat strength · captain & takers on the team screen.